These light bars are designed to hook to the factory wire harness on your 2016-Current Polaris General. They use a very bright 7" light bar available in a dual or single configuration. Both use a machined and anodized aluminum mounting block that utilizes the factory hole locations under the box.
To make it even more simple. We are now adding both the 2 wire plug and the ECU pin plug in all the kits. So no matter if you have a 2016 or a 2023 this kit will have the proper harness you need!
No drilling required. There will be no running of wires up through the roll bar and they will not be exposed in the cab interior. All wiring is tucked under your bed.
You do not have to have the factory plugs shown in pictures for the lights to work automatically the 2nd included plug will wire directly to your ECU and work the same.
Dual kit includes: 2 pre-wired light bars, 2 aluminum mounting rails, zip ties, 4- T27 mounting bolts
DYI Kit Includes: light bar, aluminum mounting rail, 2- T27 mounting bolts
Taking 3 simple measurements is all you need to do. Take the time to watch this video explaining how to measure for the right fit. 95% of all trail sleds 2012 and newer with stock skis will take the 8" with the 1" offset
In most cases your stock bolt will work perfect. If the ski bolt has ever been changed with something different than stock you will likely need to measure it and order a bolt kit.
On the newer Ski-Doo sleds you're going to want to replace the washer behind the nut with the supplied fender washer included in each set. This gives the EZ WheelZ axle a better metal surface to butt up against.
Most all 2012 and newer models won't need any modifications.
Yes, you can, but most likely you will have to turn your ski bolt around and mount them to the outside of your ski. See this video for an example.
You can contact us through our contact page. We will be happy to assist you.