Terick Solutions
3M 06396 Adhesion Promoter/Sponge Applicator Packet
3M 06396 Adhesion Promoter/Sponge Applicator, 2.5cc (Single Packet, One Pack)
We recommend using this to help with Adhesion of our hook & hoop to your UTV. If you are NOT installing our sound deadener, I highly recommend using this to get your Hook and loop to stick better to the plastic back wall.
THIS LISTING IS FOR 1 INDIVIDUAL PACKET
3M Adhesion Promoter 06396 is a liquid primer for enhancing the adhesion of 3M acrylic foam tapes for interior and exterior trim applications. Liquid primer is packaged in convenient, single-use applicator packets. Strongly recommended for use with 3M double-sided tape on exterior body side moldings, trim and claddings, particularly those parts made of injection molded plastics such as TPO and RIM. Can be applied on common low surface energy plastics used for automotive dash and interior trim applications (TPO, PPO, PP, PC, +ABS, etc.). One packet covers approximately 150 square inches of substrate at the recommended coating thickness.
FAQ
Fitment
Taking 3 simple measurements is all you need to do. Take the time to watch this video explaining how to measure for the right fit. 95% of all trail sleds 2012 and newer with stock skis will take the 8" with the 1" offset
In most cases your stock bolt will work perfect. If the ski bolt has ever been changed with something different than stock you will likely need to measure it and order a bolt kit.
On the newer Ski-Doo sleds you're going to want to replace the washer behind the nut with the supplied fender washer included in each set. This gives the EZ WheelZ axle a better metal surface to butt up against.
Most all 2012 and newer models won't need any modifications.
Yes, you can, but most likely you will have to turn your ski bolt around and mount them to the outside of your ski. See this video for an example.
Other
You can contact us through our contact page. We will be happy to assist you.