Terick Solutions
EZ Wheelz
*PLEASE READ FULL DESCRIPTION AND VIEW THE FITMENT VIDEO*
- Polaris & Ski-doo factory ski bolts are M10x1.5 coarse thread.
- Our Bolt Kits are M10x1.5 coarse thread.
- Arctic Cat & Yamaha factory ski bolts are M10x1.25 Fine thread
Our Patented EZ WheelZ are the best wheel solution for moving your snowmobile around while loading, unloading, or moving in and out of your garage or shed. Securely fastens to the ski bolt and you are able to drive your snowmobile around without damaging your wear bars or the surface that you drive on (concrete floor, blacktop, grass, or gravel etc.).
Watch the video in the photos for proper fitment.
Available in 8" (for trail sleds) and 10" for (Mountain sleds) diameters with a 1.0" standard and 1 5/8" wide offset axle for wide ski applications.
If you have the Polaris Gripper Ski you need to install our stability spacer. Most all RMK and Khaos sleds have these skis. (sold separately).
10" Wheel with 1" Offset EZW10100CSPR Includes 2 Stability Spacers.
Includes: heavy duty 8" or 10" non flat wheels with roller bearing hubs, stainless steel precision machined axle, cast aluminum form fit hand wheel.
Most all Polaris and Arctic Cat 2012 & newer, Skidoo 2008 & newer (trail sleds) will only have room for a 8" wheel. Watch the fitment video for more details.
No Assembly Required!! All EZ WheelZ come Pre-assembled and sold in pairs.
Bolt kits are available if needed. (most aftermarket skis will need our bolt kit)
**** Please note, these are foam filled tires and are intended for moving your sled around and then removing. The tires will flat spot if you store your snowmobile with wheels installed. Please do not keep these installed for extended periods. ****
Not to be confused with snowmobile dollies, sled wheels, snowmobile wheels, snowmobile cart, etc.
FAQ
Fitment
Taking 3 simple measurements is all you need to do. Take the time to watch this video explaining how to measure for the right fit. 95% of all trail sleds 2012 and newer with stock skis will take the 8" with the 1" offset
In most cases your stock bolt will work perfect. If the ski bolt has ever been changed with something different than stock you will likely need to measure it and order a bolt kit.
On the newer Ski-Doo sleds you're going to want to replace the washer behind the nut with the supplied fender washer included in each set. This gives the EZ WheelZ axle a better metal surface to butt up against.
Most all 2012 and newer models won't need any modifications.
Yes, you can, but most likely you will have to turn your ski bolt around and mount them to the outside of your ski. See this video for an example.
Other
You can contact us through our contact page. We will be happy to assist you.