Terick Solutions
Sequential Turn Signal LEDs for UTVs
Replace your boring ¾” plug leds with these great looking and easy to install 6” sequential LED strips. Includes everything needed to add to your existing turn signal kit.
6” LED Daytime Running Light DRL Strips
Input Voltage: DC 12V
Feature: Waterproof/Sequential flow turn signal
Shell color: Black
Size: 15.5CM(6") x 22mm(.87")
- White DRL and yellow flowing turn signals
-Red wire to white light, yellow wire to yellow light, black wire to negative pole of supply.
(When driving the light is white, it is yellow when turning)
Installation:
- Stick on outside the headlight
- Wire connection:
Red Wire: connect to the positive pole of the supply or ACC(+)
Black wire: connect to the negative pole of the supply (-)
Yellow wire: connect to the positive pole of turn signal (+)
Included in Package:
2 PCS LED Daytime Running/Signal Light
2 PCS 47" pcs red wire
6 heat shrink spade connectors
FAQ
Fitment
Taking 3 simple measurements is all you need to do. Take the time to watch this video explaining how to measure for the right fit. 95% of all trail sleds 2012 and newer with stock skis will take the 8" with the 1" offset
In most cases your stock bolt will work perfect. If the ski bolt has ever been changed with something different than stock you will likely need to measure it and order a bolt kit.
On the newer Ski-Doo sleds you're going to want to replace the washer behind the nut with the supplied fender washer included in each set. This gives the EZ WheelZ axle a better metal surface to butt up against.
Most all 2012 and newer models won't need any modifications.
Yes, you can, but most likely you will have to turn your ski bolt around and mount them to the outside of your ski. See this video for an example.
Other
You can contact us through our contact page. We will be happy to assist you.