Terick Solutions
Carpet Kit for Polaris RZR 900 & 1000 Trail
Similar to the RZR 1000 but specifically cut for the smaller 1000 Trail and 900 models which have a narrower cab. High quality auto marine 2 piece carpet, one for the center access panel and one for the entire back wall. Attaches with hook and loop, for easy installation and removal for cleaning. These carpet kits help lower your cab temperatures and reduce the noise inside the cab.
Easy Install: Simply lay out your carpet on a flat surface for 24 hours before installation. (This will help remove wrinkles.) Remove the seats and clean the back wall thoroughly. Use rubbing alcohol to remove any oils that might be present. Line up the top of the carpet to the top of the back wall and remove the adhesive hook and loop pieces one by one, starting in the center and working your way top to bottom and center
The back wall carpet measures about 43.5" wide
For the ultimate comfort add our 100 mil sound deadening material for maximum performance. (Sold Separately)
FAQ
Fitment
Taking 3 simple measurements is all you need to do. Take the time to watch this video explaining how to measure for the right fit. 95% of all trail sleds 2012 and newer with stock skis will take the 8" with the 1" offset
In most cases your stock bolt will work perfect. If the ski bolt has ever been changed with something different than stock you will likely need to measure it and order a bolt kit.
On the newer Ski-Doo sleds you're going to want to replace the washer behind the nut with the supplied fender washer included in each set. This gives the EZ WheelZ axle a better metal surface to butt up against.
Most all 2012 and newer models won't need any modifications.
Yes, you can, but most likely you will have to turn your ski bolt around and mount them to the outside of your ski. See this video for an example.
Other
You can contact us through our contact page. We will be happy to assist you.